Quick Setup Instructions

Before installation, PeaceMaker must be configured by setting the row of 10 switches inside the back of the unit.  These settings tell PeaceMaker specifically when the user wants siren silencing to occur.  After setting the 10 switches, be sure to momentarily press PeaceMaker's reset button to lock in all of the new settings.

Quick Setup illustrations are provided below for typical users of PeaceMaker.  These are the recommended default settings for the product.  Use these settings to configure PeaceMaker for the average home, business, car, or boat alarm system.  These default settings provide an excellent balance between the maintenance of an effective break-in deterrent and the minimization of noise pollution during false alarms.

Some users may prefer a “quieter" setting, where PeaceMaker silences the siren at the first hint of extended or repeated siren soundings.  Others may want a “noisier" setting, where silencing does not occur until the siren has sounded for longer periods of time or has triggered many times.  Detailed Setup Instructions are provided for users who would like to customize PeaceMaker’s settings for their specific needs or would like more detailed setup information.

Quick Start – Typical Home / Business Alarm

Set the row of 10 switches as shown below then momentarily press PeaceMaker's reset button.

Quick Start – Typical Car / Boat Alarm 1

If your car alarm honks the car horn when it is triggered or if your car alarm siren "plays" a variety of tone patterns when triggered and some of these tone patterns have brief silent periods, set the row of 10 switches as shown below then momentarily press PeaceMaker's reset button.

Quick Start – Typical Car / Boat Alarm 2

If your car alarm sounds its own siren without any silent periods when it is triggered, set the row of ten switches as shown below then momentarily press PeaceMaker's reset button.  Your siren may sound a single tone or may play a variety of tones, as long as it doesn't have momentary silent gaps.